News & Media
Pinshape contest collection week 7
2018-01-24
In this week we have some prints from games, movies and one suitable for car lovers. Let us have a look!
Scorpion 3D Print Model - 3D Printed by tacblades
Print Time: 36 hr(s) 0 min(s)
Material Type: PLA
Layer Height: 0.1 mm
Print Speed: 40.0 mm/s
Extrusion Temperature: 219.0°C
Infill %: 15.0 %
This is a 3D printed scorpion. This type of PLA gives it a bronze feel and make the scorpion very alive!
Overwatch Mercy Caduceus Staff - 3D Printed by Jonathan Bowen
Print Time: 40 hr(s)
Material Type: PLA
Layer Height: 0.2 mm
Extrusion Temperature: 210.0°C
Infill %: 15.0 %
This Overwatch Mercy Caduceus Staff is designed to be attached to a 1" PVC pipe. This allows it to be scaled to the user's height. The design does require some support but has been slice to minimize it. Wing connector Open and Wing Connector Closed are used to hold the wings in either open or closed formation depending on how you want to build the prop.
Ferrari Enzo OpenRC mod - 3D Printed by Matt0
Print Time: 60 hr(s)
Material Type: black pla
Layer Height: 0.2 mm
Print Speed: 25.0 mm/s
Extrusion Temperature: 210.0°C
Infill %: 25.0 %
3D printed car models are very common these days and this is a perfect model for fans of the Ferrari Enzo and Formula one. The designer create this for Daniel Norées OpenRC F1 car. The best part is you can also control it and make it run!
The Young Wolf's Howl, Exotic Sword from Destiny's Rise of Iron - 3D Printed by blurrycorgi
Material Type: PLA
Layer Height: 0.1 mm
Print Speed: 100.0 mm/s
Extrusion Temperature: 215.0°C
Infill %: 5.0 %
Here is the Young Wolf's Howl, the 3rd year exotic sword from Bungie's hit game Destiny. The sword itself is 1:1 scale, measuring over four and a half feet long, and includes both channels for reinforcement rods and a slot-and-tab alignment system with the blade.
Groot - 3D Printed by jimenezr
Print Time: 18 hr(s)
Material Type: Pla
Layer Height: 0.15 mm
Print Speed: 60.0 mm/s
Extrusion Temperature: 215.0 °C
Infill %: 40.0 %
This is a groot from the Guardians of the Galaxy. It took a long time and came out pretty good. It’s stained and used black marker to paint the eyes and clear Epoxy glue to get the gloss on the eyes.